ZnSe/CoSe/NCDPH composites as anode materials for lithium ion batteries with high capacity and long cycle

In this paper, dopamine hydrochloride (DPH) is introduced to synthesize ZIF-8@ZIF-67@DPH in the preparation of ZIF-8@ZIF-67. ZnSe/CoSe/NC_DPH (N-doped carbon) composites are calcined in a high-temperature inert atmosphere with ZIF-8@ZIF-67@DPH as the precursor, selenium powder as the selenium source. ZnSe/CoSe/NC_DPH has high discharge specific capacity, good cycle stability and outstanding rate performance. The first discharge capacity of ZnSe/CoSe/NC_DPH is 1616.6 mAh g⁻¹ at the current density of 0.1 A g⁻¹, and the reversible capacity remains at 1214.2 mAh g⁻¹ after 100 cycles, the reversible capacity is 416.7 mAh g⁻¹ after 1000 cycles at 1 A g⁻¹. Therefore, ZnSe/CoSe/NC_DPH composites provide a new step for the research and synthesis of new stable, high-capacity, and safe high-performance lithium ion batteries. The bimetallic selenide composites not only have bimetallic active sites, but also can form synergistic effect between different metal phases, which can effectively reduce the capacity attenuation caused by volume expansion and reactive stress enrichment during lithium storage of metal oxide anode materials. Meanwhile, N-doped carbon can improve the conductivity and provide more active sites to store lithium, thus improving its lithium storage capacity.     

离子色谱-电导法检测酱油中氯化钠的含量

该研究采用灰化预处理+离子色谱-电导法检测酱油中食盐的含量，并与莫尔法、电位滴定法进行比较。结果表明，莫尔法存在滴定过量问题，电位滴定法对温度等外界环境条件和仪器操作要求苛刻，而离子色谱-电导法具有操作简便快速并具有较好的准确度和精密度。实验结果表明，氯化钠含量处于11.56～11.61 g/100 mL之间，回收率实验结果为96.00%～102.10%，相对标准偏差为0.089%。干扰实验对结果无明显影响，且能同时测定多种离子，可用于成品酱油中氯化钠含量的检验。     

Li0.95Na0.05MnPO4/C nanoparticles compounded with reduced graphene oxide sheets for superior lithium ion battery cathode performance

Sodium-substituted LiMnPO₄/C/reduced graphene oxide (LNMP@rGO) was synthesized in this study via freeze drying and carbon thermal reduction method with graphene oxide as carbon source. Sodium ion doping is optimized and rGO effects are evaluated by XRD, SEM, TEM, BET, Raman, and electrochemical performance measurements. Well-distributed nanoparticles with average size of ~50?nm are evenly distributed on the surface or intercalation between rGO layers, resulting in a porous ion/electronic conductive network. Compared to 122.3?mA?h?g^?1 in unmodified LNMP, the best LNMP@rGO (20?mg rGO) exhibits an excellent initial discharge capacity of 150.4?mA?h?g^?1 at 0.05?C at 122.9% of the initial capacity. The capacity retention rate is 95.8% of the initial capacity after 100 cycles at 1?C. Capacity of 101.2?mA?h?g^?1 is preserved even at rates as high as 10?C.     

Simple solution-combustion synthesis of Fe2TiO5 nanomaterials with enhanced lithium storage properties

The porous Fe₂TiO₅ particles are successfully synthesized through a facile one step solution combustion method. The Fe₂TiO₅ negative materials exhibit remarkable electrochemical performance with discharge capacities of 371.4?mAh g^?1 at the 100 th cycle, and display promising rate stability with discharge capacities 76.6?mAh·g^?1 at a high current density of 3.2?A?g^?1. In addition, the mechanism of electrochemistry reaction is illustrated by the CV, raman and EIS measurements, the irreversible capacity mainly causes from the irreversible lithium insertion at 1.8?V. The results indicate that the one step solution combustion synthesis of porous Fe₂TiO₅ is a promising strategy for developing low-cost and high-performance Ti-based negative materials.     

Alkali metal ion substitution induced luminescence enhancement of NaLaMgWO6:Eu3+ red phosphor for white light-emitting diodes

Alkali metal ion substitution is an effective strategy to improve the luminescence properties of phosphors. In this work, a series of red-emitting phosphors Na_1-xLi_x/2K_x/2La_0.6Eu_0.4MgWO₆ were prepared by a traditional high-temperature solid-state reaction. Their phase structure, microstructure, luminescence properties and potential application in phosphor-converted white light-emitting diodes (pc-WLEDs) were investigated in detail. X-ray diffraction (XRD) result revealed the formation of a solid solution when x?≤?0.3, which kept monoclinic structure of NaLaMgWO₆. Photoluminescence investigation indicated that the partial substitution of Li⁺/K⁺ ions for Na⁺ ions improved largely the red emission of Eu³⁺. Based on the optimized Na_0.7Li_0.15K_0.15La_0.6Eu_0.4MgWO₆ sample with relatively good thermal stability, a WLED device was fabricated by combining a near-ultraviolet (NUV) chip (~400?nm) with the phosphor mixture of commercial green/blue phosphors and the optimized red phosphor. The results indicated that the optimized red phosphor in this work could be a potential candidate for WLEDs pumped by NUV chips.     

超声提取-离子色谱法测定银精矿中水溶性氟

银精矿中水溶性氟会随雨水的冲刷进入生物圈,直接对土壤、水体、大气、人类健康产生危害。实验提出超声提取-离子色谱法测定银精矿中水溶性氟,为银精矿中水溶性氟的检测及后续环境影响评估提供重要的技术支撑。称取0.2g样品(过150目筛),加入30mL水,在40℃时超声提取20min后,使用阴离子交换柱进行分离,使用碳酸钠-碳酸氢钠混合溶液作为淋洗液进行淋洗,洗脱时间为25min,通过电导检测器进行F^-检测。F^-质量浓度在0.5~10mg/L范围内与对应的峰面积呈线性关系,校准曲线线性相关系数为0.9998;方法检出限为0.062mg/L,测定下限为0.21mg/L。按照实验方法测定两个银精矿中水溶性氟,测定结果的相对标准偏差(RSD,n=6)为3.8%和4.3%;加标回收率为92%~102%。     

Revealing Electrical-Poling-Induced Polarization Potential in Hybrid Perovskite Photodetectors

Despite recent rapid advances in metal halide perovskites for use in optoelectronics, the fundamental understanding of the electrical-poling-induced ion migration, accounting for many unusual attributes and thus performance in perovskite-based devices, remain comparatively elusive. Herein, the electrical-poling-promoted polarization potential is reported for rendering hybrid organic–inorganic perovskite photodetectors with high photocurrent and fast response time, displaying a tenfold enhancement in the photocurrent and a twofold decrease in the response time after an external electric field poling. First, a robust meniscus-assisted solution-printing strategy is employed to facilitate the oriented perovskite crystals over a large area. Subsequently, the electrical poling invokes the ion migration within perovskite crystals, thus inducing a polarization potential, as substantiated by the surface potential change assessed by Kelvin probe force microscopy. Such electrical-poling-induced polarization potential is responsible for the markedly enhanced photocurrent and largely shortened response time. This work presents new insights into the electrical-poling-triggered ion migration and, in turn, polarization potential as well as into the implication of the latter for optoelectronic devices with greater performance. As such, the utilization of ion-migration-produced polarization potential may represent an important endeavor toward a wide range of high-performance perovskite-based photodetectors, solar cells, transistors, scintillators, etc.     

Failed Neuroprotection of Combined Inhibition of L-Type and ASIC1a Calcium Channels with Nimodipine and Amiloride

Effective pharmacological neuroprotection is one of the most desired aims in modern medicine. We postulated that a combination of two clinically used drugs—nimodipine (L-Type voltage-gated calcium channel blocker) and amiloride (acid-sensing ion channel inhibitor)—might act synergistically in an experimental model of ischaemia, targeting the intracellular rise in calcium as a pathway in neuronal cell death. We used organotypic hippocampal slices of mice pups and a well-established regimen of oxygen-glucose deprivation (OGD) to assess a possible neuroprotective effect. Neither nimodipine (at 10 or 20 µM) alone or in combination with amiloride (at 100 µM) showed any amelioration. Dissolved at 2.0 Vol.% dimethyl-sulfoxide (DMSO), the combination of both components even increased cell damage (p = 0.0001), an effect not observed with amiloride alone. We conclude that neither amiloride nor nimodipine do offer neuroprotection in an in vitro ischaemia model. On a technical note, the use of DMSO should be carefully evaluated in neuroprotective experiments, since it possibly alters cell damage.     

Synergistic effect of iodide ions and bark resin of Schinus molle for the corrosion inhibition of API5L X70 pipeline steel in H2SO4

The synergistic effect of bark resin of Schinus molle (BRSM) and iodide ions in 0.5 M sulfuric acid has been studied for the first time by potentiodynamic polarization and electrochemical impedance spectroscopy measurements; also, the surface morphology has been analyzed by scanning electron microscopy–energy-dispersive X-ray spectroscopic analysis in the present work. The results show that the BRSM and iodide ions have an evident synergistic inhibition effect in a 0.5-M sulfuric acid solution. The adsorption of the BRSM/iodide ion system follows the Langmuir adsorption isotherm and acts as a mixed-type inhibitor in sulfuric acid. The BRSM/iodide ion system is an effective inhibitor for API5L X70 pipeline steel in the 0.5-M sulfuric acid solution. The maximum percentage inhibition efficiency is equal to 99% at 1 g/L BRSM + 2 mM KI.     

Facile fabrication of graphene oxide-polyethylenimine composite and its application for the Cr(VI) removal

A binary composite consisting of graphene oxide (GO) and polyethylenimine (PEI) was fabricated by a facile physical mixing. Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscope (FE-SEM), thermo-gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and Zeta potential were used to characterize the prepared graphene oxide-polyethylenimine composite (GOPC). A series of experiments were carried out to investigate the effects of some important parameters, such as molecular weight of PEI, pH, time and temperature, on the adsorption efficiency of GOPC. Due to the high amine density of GOPC, its adsorption for Cr(VI) occurred more easily at lower pH mainly via electrostatic interaction. The adsorption process matched well with the Langmuir isotherm model and the pseudo-second-order kinetic model. The maximum adsorption capacity from the Langmuir model was 370.37 mg/g at pH 2.0 and 45°C for GOPC. Thermodynamic parameters revealed spontaneous and endothermic nature of the Cr(VI) adsorption onto GOPC. The main adsorption mechanism of GOPC toward Cr(VI) was electrostatic interaction. The adsorption-desorption experiments suggested GOPC was easily recycled and its stable adsorption capacity endowed it great potential as an adsorbent of Cr(VI) from wastewater.